What do I need to pay attention to in wire harness process production?

Release time:

2023-04-25


The second station after the wiring harness is opened is the crimping process. During the production process, the crimping parameters will be effectively determined according to the terminal type required by the drawing, and the crimping operation manual will be made, so that for those who have Special requirements need to be noted on the process documents and operators should be trained.

  The second station after the wiring harness is opened is the crimping process. During the production process, the crimping parameters will be effectively determined according to the terminal type required by the drawing, and the crimping operation manual will be made, so that for those who have Special requirements need to be noted on the process documents and operators should be trained.

  In order to improve the efficiency of assembly during the use of wire harnesses, pre-installation stations must be set up for complex wire harnesses. The amount of pre-installed parts is too small or the path of the assembled wires is unreasonable, which will increase the overall assembly. staff workload.

  The final step of wire harness processing is its final assembly process. During the operation, it will effectively design tooling equipment, material box specifications and sizes according to the design of the product development part of the assembly table, and paste the numbers of all assembly sheaths and accessories. On the material box to improve assembly efficiency.